Three categories of Vape

1 electronic pole
Electronic poles are the first batch of products in the Vape market (the originator Ruyan does not count) and the first product I started. Due to the limited technology at the time, Timesvape Dreamer most of these products did not have a display screen, and the output power was adjusted by twisting parts or pressing the ignition button.
Like the more well-known ones on the market now, there are yem-y1 and lightning rod
First choice for smokers who quit smoking
Gatling pressure lever plus + i30s

2 mechanical lever
This type of product does not have any circuit board and chip protection, so the output power cannot be adjusted. The structure is composed of a metal tube and a bottom switch VOOPOO Drag. Unscrew the switch and put a 18650 battery into it.

The reason why the old players love him so much is that the direct electric heating tastes softer and more delicate mesh tank, and the reduction of the smoke oil is higher.

Everyone saw the news that Vape exploded, and the fire was basically a mechanical rod.

There are many reasons for the explosion, such as broken skins, the use of low-quality batteries, and the use of batteries that do not meet specifications may cause an explosion.

Many older brothers have tried a situation where the battery is overloaded and almost exploded after long-term power on without the safety lock.

The price of mechanical poles is focused on brand and art. The first-generation poles and prototype poles produced by some major manufacturers have appreciated several times.

This type of product is not suitable for friends who are in contact with Vape for the first time

(Domestic secret team army knife mechanical lever)

3 pressure regulating box

This is the most popular Vape category currently
As the name suggests steam crave, this type of product can adjust the power through the button on the machine

The mainstream power adjustment range is 1-120 watts
The amount of power determines the amount of smoke
The advantage of adjusting the wattage is that when you want to take a sip of Vape in an outdoor cafe and are embarrassed to emit too much smoke
You only need to turn down the power to get a moderate puff of smoke and relieve your addiction

More people choose the pressure regulating box because it needs more power to drive the heating wire when using the diy atomizer (this will be discussed later)
All in all, it is always right to buy a pressure regulator box with a price of 300-500 RMB when you first contact Vape.
(For Yihai g class enthusiasts)

Then talk about buying channels
In the past two years, Vape stores have blossomed everywhere
Many old players who have been in the pit for a long time will think of the fear of being pitted by a physical store.
The pit here means that there are some salesmen in the physical store who are not well-behaved to sell some products that are not right, so that you can get a very poor shopping experience.

For example, Vaporesso Luxe a semi-mechanical ray box is recommended plus a core with a resistance of 0.5 matched with a finished atomizer
But now this phenomenon is relatively rare
But just in case, before you go shopping in a physical store, find out what you want online, remember the model number, and then go to the physical store.
The advantage of the physical store is that the shopping guide allows you to test the taste of the smoke oil and teach you how to assemble and use it.

Therefore, it is understandable that the physical store prices are more expensive. After all, the cost is there.

There is also online shopping
The downside of vape online shopping is that you bought the smoke oil and smoked it. If you don’t taste it, you can’t return it. This is really not comparable to a physical store.

The proliferation of low-quality e-liquid is difficult to rectify before the Chinese Vape market has a formal supervision WOTOFO Profile. The low-quality e-liquid blended by workshops is even more harmful to the human body than cigarettes.
The advantage is that the price of goods is lower under the cost of rent and labor.
—–
It’s too late, go to bed first, someone will watch me and then change the atomizer
——-
The above three categories are Vape products currently circulating on the market

Vape taste may bring unknown risks

Scientists have discovered that the “flavors” in Vape contain toxins, even harmful substances not found in ordinary cigarettes. Scientists say that a large number of non-standard Vape poses unknown smoant risks to users, especially young people. Studies have shown that Vape fluid contains aldehydes, compounds that cause lung damage. The person in charge of the research team said: “What we are talking about is the taste of ordinary food, but the tissues of the lungs are very different. When inhaled into the lungs, we tested that many flavors are toxic and will completely kill bronchial cells.”

The researchers also pointed out their concerns, “The ingredients of this product are quite irregular. Some have natural flavors, some are single ingredients, and some are artificial fragrances. There are many different types of products on the market, and the harm is immeasurable. Our experiments prove that Vape , Especially the liquid component in it, the structure will change after heating, and its harm to the body should be considered.”

Vape becomes the most commonly used tobacco product among young people

A few days ago, American surgeons called for action to reduce the use of electronic cigarettes by young people, and pointed out that Vape has become the most common tobacco product used by young people. Vivek Murthy, a top American doctor, said that young people are more vulnerable to the effects of nicotine hazards than adults. He wrote in the preface of the report: “These effects can make people addicted, addicted to other substances, and weaken self-control and attention, and can cause cognitive deficits and emotional disorders.”

According to data from the US Centers for Disease Control and Prevention, between 2011 and 2015, the proportion of American middle school students using adv vape electronic cigarettes rose from 0.6% to 5.3%. But with the increase in the use of electronic cigarettes, the use of traditional cigarettes has declined. From 2011 to 2015, the proportion of American middle school students using combustible cigarettes dropped from 4.3% to 2.3%. The proportion of American high school students who use electronic cigarettes rose from 1.5% in 2011 to 16%. At the same time, 9.3% of high school students use regular cigarettes, compared with 15.8% in 2011. There is currently no evidence that the decrease in the use of ordinary cigarettes is caused by the increase in electronic cigarettes. There is also no conclusive data that the use of electronic rdta cigarettes has opened the door to ordinary cigarettes.

Are electronic cigarettes harmful?

E-cigarettes are heated to steam crave and contain liquid nicotine. Therefore, when it comes to lung cancer, electronic cigarettes are definitely much safer than traditional cigarettes.

However, Vape passes heated liquid nicotine. The key word in this sentence is nicotine. Nicotine is harmful to your body no matter how you use it. According to researchers, nicotine constricts blood vessels and increases blood pressure, but it also puts pressure on the heart ijoy. Therefore, in essence, electronic cigarettes are harmful to health because they can cause heart attacks and strokes.

The difference between Vape and conventional cigarettes is that the former may cause cancer and heart disease, while the latter can cause heart disease. Also pay attention to the risk of heart disease can be achieved by taking preventive measures, such as exercising, eating low-fat foods, and just taking care of yourself,

In short, electronic cigarettes are harmful to health, or at least they can. But overall obs vape cube, they are much less harmful than ordinary cigarettes.

dovpo mvv squonk basium nickel topside review

Introduction

 

dovpo squonk is a device variable voltage potentiometer style and the latest version of this bestseller Dovpo M VV. This device comes with a choice of 3 textured panels of different colors and has a nice weight to hand in my opinion. Cook at as low as 0.08 and in turn wrote that the full potential of this powerful machine 280W, whether 18650 will do this, I do not know and I do not intend to treat and recommended the construction of so-called simple voltage to read (just because you can does not mean you should!).

 

content:

 

M 1 × VV DEVICES II

USB cable 1 × type C

Quality Control Board 1x

Safety Data Sheets 1x Battery

1x Card Social Media

1 x Manual

 

Aesthetics and ergonomics

 

M VV II is the cardboard packing with a viewing window so you can see the colors device before opening. I agree to the release of the skull and roses, though undoubtedly the version available at the time of writing options Hannya, skull and roses and samurai of the Dragon.

This device has a black frame zinc alloy zinc alloy panels also, a removable battery and to allow one fixed payments. The panel has a plastic colorful design with embossed texture that feels durable despite the impressive topic will not be everyone’s taste.

The face has a cutting corner where it meets the top of the camera and just below, we have a big black button fires dome at the bottom of the face, have a sphere with LED indicator light above. The backbone of this unit without nature, but the center of the cavity to reduce the device which is the most ergonomic basis as well. At the top, as mentioned, had a cut corner on the one hand have a plate 510 is placed in the center of the top of the panel instead of around the device, ie 510 gold-plated and comes with a trip decent. I have a M VV (Blue Ray Version) Original I bought and I think H VV II has an ergonomic advantage, I also found the almost perfect weight, not too light, not too heavy, but it’s pretty subjective.

 

dovpo mvv Specifications and Features:

 

Size: 91mm x 53mm x 27mm

Material: PC + zinc alloy

Resistance: 0.08ohm – 3.5ohm

Operating voltage: 6.4V – 8.4V

Output voltage: 1.0V – 8.0V

Batteries: 2 x 18650 (not included)

Display: 3 LED indicator

Maximum output: 280W

The new aesthetic appearance and colorful design elegant

adjustable voltage range of 1 V to 8 V

Some protection for safety vaporizer

the magnetic drum cover for easy installation

Practice Integrated USB Type C

Threads: 510

Color / Design: Hannya, Skull and Roses, Dragon Samurai

No battery

The side panels which need double delete your suit 18650 have a very visible position on the side, also it has “open” and the arrow stamped on the metal of the spine. Once outside, we see that has a lover of both up and down and a corresponding section directly above the battery has a non-metallic coating for safety. Battery connected to a tape helps to remove the battery needed because they are deeply seated in the compartment and orientation again disappointing Black on black. Also on the front side so that the battery compartment is hidden when the panel is in place is a USB type C. During the test port for moving the panel with or without the battery installed there was no movement, cracks job!

Operation II M VV

dovpo basium are potentiometers variable voltage device style that is very simple to use, but has to be given this honor because this type of device gives a certain strength. This device is the usual 5 clicks to activate and deactivate the LED 5 clicks for action confirmed by rail bike, red, yellow, green. This device has an indication of battery status is indicated by the color of the LED light when vaping, status is as follows:

Green = 7.6V or above

Yellow = 7.0V and 7.6V Between

Red = 6.9V or below

If you recharge your batteries in the camera (I do if it’s the only option) LEDs provide an indication of support following the same color and the percentage when vaping, when the battery is fully charged, the indicator turns off.

To use the device that rotates the dial to adjust the tension and the vaporizer. There are 5 main parameters of line with other agreements between each, you can also go between brands and micromanaging their power right after. You can not see what is the right or power to know what the output power is provided, the trick is to start small and gradually increase the voltage until the desired power is obtained, this vaporizer device with feeling instead of fixing add your charm this device comes with all the usual security protection you get with another device regulated if kicked indicated by the various LED flashes.

protection

low-voltage protection

overheating protection

Reverse battery protection

Short circuit protection

Protection of overtime

My experience using dovpo nickel

I really like the style of a device potentiometer variable voltage and MVV II has an ergonomic lightweight and Type C USB, so I think better the original device and is equivalent to 4 times Invader Tesla as the best that I have no use.

You really need to start at the lowest position and crank slowly until the desired power is obtained, you will be surprised how low you need quickly. You need to get your nails to mark the arrow to adjust and prefer Invader 4X because it is much easier to move to move quickly, but Dial M VV II always very well and is less Checklist that most styles devices potentiometer I’ve used. I like shooting dome button, you can not lose and had a very satisfying click when the fire of the device without any delay and instantaneous way, I had no complaints press.

At the risk of repeating myself you really need to start small and gradually increase strength until vaporizer desired, this device offers a lot of energy and, personally, have never had to use the style of a potentiometer with dial more than half and usually much lower. They are user settings for various guide construction provides output power For setting is different, but is only indicative output, including the maximum power of 280W is dependent on the 18650 that use claimed and tension adjustment freshness they are.

I like the weight in the hands of unity and sense of texture colorful design to be very durable, even if the indication of the status of the battery may have more levels that are well spaced and adapted to use. The device can hold up to 25 mm without false dovpo topside more will adapt well intentioned, but if you are looking for a device that can accommodate a large Atty this is not for you. Through the USB cable C type support including the load devices and to the final pro board it was very affordable.

how

well-made devices

aesthetically pleasing

great weight

colorful textured finish (panel)

Dial moves smoothly

Micromanagement of the output voltage to the desired power

a powerful device

fire direct ramp to the instant

Domed big shot button

Very easy to use

The battery cover is perfectly safe

Battery tape

The battery indicator

Battery life seems a little better than expected

a degree of security protection

Charge cards accepted

Type C USB

low price

counter

VV only (obviously)

Black in the direction of battery black dial

I would again thank Cortana Healthcabin provide DOVPO M VV MOD Box II for the purposes of this review.

You can buy here:dovpo

https://www.vapeciga.com/collections/dovpo

 

dovpo box mod vv topside squonk basium nickel 230w dual review

topside squonk mod, a mini version of the popular BLOTTO Dovpo. Except for the size of what has changed? Let deepen this test and find out.

 

This product has been delivered to Dovpo kind of generosity in order to stand the test side. Other thoughts you will find below are mine and are not affected by the fact that this talent.

 

Please note that this article may contain affiliate links, which helps fund the site vaporizer Make ‘N’.

 

Introduction

Undoubtedly the original BLOTTO RTA Dovpo and vaping Bogan is still very popular. But only BLOTTO Mini lose too much of its original charm? BLOTTO Dovpo Mini is perfect now as a single coil RTA? And if the problem occurred? Let’s delve into this review and find out more.

 

The contents of the box

RTA Mini Dovpo fill BLOTTO

1 x Mini BLOTTO RTA – 2 ml glass chimneys.

1 x 4 ml Ultem bubble tube.

1 x4 s bubble tube glass.

1 x bottle opener.

1 x screwdriver tool T.

Parts of screws and sealing rings.

1 x Manual

packaging

This packaging vv box mod is the same as the original, but smaller BLOTTO. In addition, the front is made of a transparent plastic cover that will allow buyers to easily see the color options covered. Although the characteristics of the logo, a list of key features return, logo fulfillment of the government, Auditor of authenticity and health and safety warnings.

 

Removing the outer cover reveals Dovpo BLOTTO sitting RTA Mini pop and immediately hand. Furthermore, under the incrustation vaping Bogan bottle opener, bag parts, additional 4 ml glass, and Ultem bubble tube. But as the original review BLOTTO Dovpo I, Dovpo BLOTTO Mini does not come with the coil.

 

manufacturing quality

Because of the small size and weight 53.6g, the weight BLOTTO Mini is not quite like the original. Although BLOTTO Mini remains solid and feels like it will continue to use the long-term good.

 

Dovpo BLOTTO probably RTA Mini is driving well. In addition to grinding very smooth fireplace inside and out. also own thread, allowing the cover to screw the bottom of the smooth platform.

 

Also the depth of the knurling on the top of the cap and the control ring is suitable airflow without causing problems with the air flow inlet clean cut. Furthermore, change of control ring air flow changes smoothly and easily through the top of the bottle style knurled.

 

Probably continuous quality machine at the top of the tank with a bayonet at the top of the body fit. But it is still easy to remove by hand. Unfortunately, existing I finished singing the worn blue.

 

However Dovpo BLOTTO Mini has the same set of 1 mm based on the tank. Which become visible with mods plates 510 also raised.

 

While the original industrial stylization is maintained, basium squonk mod Bridge is still great to see. In addition to all milling work clean finish for a good rate. But it is not the same as the original, BLOTTO. However airflow inlet and juice wells clean cut without burrs.

 

A BLOTTO as in the original Mini Dovpo 4 ml Pyrex or Ultem glass bubble has not had problems with leaks or leakage. However Ultem is a little tight.

 

Cut

Blotto Dovpo dimension of 44 mm Mini the bottom of the tank support at the upper end of the droplets and has a diameter of 22 mm.

 

utility

Although they are technically able to work well configuration Dovpo BLOTTO RTA Mini single and double coil. However, due to the small platform it was most suitable to build a single coil. However coil inherently easy placement and evacuate. Due to the design of building a platform size of the inlet and juice. Fundamental BLOTTO Mini being very lenient single coil RTA, unless used not enough absorbent material.

 

circular

 

Undoubtedly, the circular double BLOTTO Dovpo Mini is not as easy as the original. Especially since the airflow over all the posts and arches, so very little game. Therefore, 3 mm double coil is out of the question that best fit to 2 mm. However deck is perfect for the individual coils are larger and run a little warmer as double Kanthal coils merged Clapton.

 

evacuating

 

dovpo nickel 230w mod of capillarity as easy as the original Mini with a good amount of space in juice consumption. Similar to the original, the material discharge plate to the outer diameter of the base. In addition, it requires exploration, working behind a soft cotton cotton got into the juice too.

 

 

In addition, once inserted the cotton gently lift and down to make sure there is enough movement. Also make sure that when the shaft is saturated, does not grow too much and choke himself. Reducing the liquid flow-e. Now all that remains is for the back of the main cotton e-liquid favorite pop in your tank, recharge and enjoy.

 

One point to note, regardless of how they can be combined Dovpo Mini BLOTTO, problems tend to occur with a glass roving right 2ml installed. Furthermore, the proximity of the outer glass fireplace, the air bag is formed around the hole juice can not easily increase the path. Therefore, they can not reach an E-liquid or both ends of the shaft result in poor performance.

 

Fill

 

Rotate and remove the top cover allows easy access to bayonet. But because the size is reduced, the load can be a pain when the Mini and a glass right BLOTTO Dovpo used. Furthermore, the glass too close to the outer wall of the chimney causing the air cushion. Furthermore, as the original, the filling holes are inwardly bevelled edges, which adds to fill very slow. But movements through one of the tubes of 4 ml facilitates this. But you should not do or necessary.

 

Eraser

 

Undoubtedly, the airflow topside dual may have a tight tie. Moreover proper operation of the control ring of air flow can be completely closed. If desired. However, with a small construction of a bridge, if you choose to build double coil you can find vaporizer too hot with an air flow also closed.

 

However, because the second coil is fed from the bottom curved and vertical pillars, air almost all receiving coils. Therefore, this produces steam production is smooth and balanced. A the same as in the original, I enjoyed Dovpo BLOTTO Mini two third opening merged with the air flow Clapton single coil.

 

buts

2 ml glass tube equipped Unfortunately standard is poor. In addition quickly it became unusable because of the proximity of the outdoor fireplace glass. Resulting in air pockets so that inhibits loading and wicking. Both the paint finish on the blue version is already showing signs of wear within two weeks of use, which is not very large. A the same as in the original game of 1 mm at the base of the RTA seems strange. Especially when used with mods plates 510 have been raised.

 

summary

While RTA Mini Dovpo BLOTTO offer nothing more than the original. However, the small size makes Dovpo BLOTTO Mini is perfect for a single coil use. Without the need for a greater power than the original RTA BLOTTO. In addition, the remains of the air stream is silky smooth and great taste.

 

In short, if you enjoy your single reel FSA are like me and use Kanthal coil or fused Clapton hot like a hot coil and mini Dovpo BLOTTO is perfect for keeping the cold coil.

 

You can buy here: dovpo box mod

https://www.vapeciga.com/collections/dovpo

dovpo vape vv mods squonk box basium topside dual review

vv box mods is the latest in a little-known Dovpo. I have a ton of their product, but I like the mod M VV there a few years ago, and superstructures and double superstructures Squonk mods were also very good company for solid set of my limited experience of the end. I recently reviewed your mod pod kit D-II and VV salt M recently. This is my first rebuildable despite its shape so I remember. The BLOTTO RTA is double or single coil for DTL vaping and 25 mm at the bottom of the platform and postless 2 or 6 ml capacity. It was designed (both available) with popular YouTube users are below Bogan vaping. Available in three colors black, SS and Gunmetal available online around 30-40 dollars. Most of China, but I see vaporizer royalty was $ 32 for the USA ..

 

Manufacturer specifications

Working with Sam Parsons vaping Bogan

base diameter of 25 mm

Capacity tank Ultem 6ml

reinforcing glass

top 304 stainless steel construction

Top threaded filling system

Two Quad install Terminal Construction Platform

Top-Side guaranteed by flat head screws

PEEK insulator

single or double coil configuration

Airflow based cutting bridge

Boring 242 ° flow honeycomb double air – 26 holes per side

threaded connector 510

Included in the box:

1 Total BLOTTO RTA

1 The number of glass bubbles

1 Number glass bubble Ultem

1 Total accessory bag

Manual-1 Quantity

1 The number of opener

Code of authenticity in the retail box

Photo album:

album

 

first impressions and features

When I came to this RTA, I’m glad to see him. Not many repairable and even created ECC person who actually do. To the like 5 to 6 RTA did this year really be vaping usually a slow month and 9 months. Beyond that I love the look and always as bridges postless usually very happy to see the new RTA came to the market. I also liked the option of a 2 ml glass right or 6-ml glass bubble.

 

Build bridges and capillarity (photos above)

Let us now build a platform. These squonk box basic platform. Nice postholes and large to accommodate all types of wire to be used in this reality. headless screws cover good quality of work and include a spare set 4. I hope you have a selection of my favorite hexagonal, but it’s just a flat head. I still can not complain. Just a preference thing. Screws come from the way the merged Claptons flat cable is not bent during installation. Because it is necessary precut postless your prospects. Unfortunately RTA does not come with a roll of tin covered that has become the norm and the manual is a good long list. Personally, it seems to be an ideal lead with 5 mm. Build a fairly small space. If there are many going simple place as coil to adjust identification coil 4 mm, but as a double coil RTA ID 3 mm closest obtainable without touching. 2.5 mm DI would be better to give a room. I wish there was more room for private construction a double coil. Overall, it was a platform that is very good is easy to build and one of my favorite genre of personal game, but perhaps not ideal for builders of new platforms like postless is not always the easiest to build, as there to carry precut and they do not include a pre-cutter.

 

Mecha is very easy. This axis is pretty good and you do not have to go super slim on its axis. Just normal amount. He lifted a small bridge, if a “GTA style” so just drop your cotton through the precut holes down.

 

success

Regarding performance, the use as a single coil and basium squonk. I ran 5 is based on it. One construction ID 4mm round coil wire, a 4 mm ID Coil Construction unique luxury, 3mm ID double coil construction, luxury, luxury 1 2.5mm ID double coil construction, and double coil 3 mm ID mounting a round wire. RTA dual coil as flavorwise discovered less overall compared to many good people in the market today and even some older. It was fine for the wire around the building, but if a wireless tower is used, but, even so, it was surpassed by many others since. Where can I find it works best to build a large luxury single coil. Again still not as good as in 2017 or even the selection Lite aromamizer FSA in 2019, but still better than many single-coil RTA 2018. Maybe not the best, but it is one of the best options you can find now. So overall, it was less like a double winder, but fine for round wire, but rather as a single reel with the luxury of a single coil, I do not like that is versatile too.

 

general impressions, details and extras

This is less than the flow of air RTA 26 smaller round holes each side is on the air flow and the air flow in a style “ramp”. It is a vaporizer limited DTL is completely open. AFC, but despite much grip is my first complaint about the quality of the FSA. It is always very difficult to solve and to start on that really stuck and not going to change for me at all times. Fortunately, I was stuck open, but still full. It should be easy to adjust and not so tight.

 

The top of the filling screw is standard that a top hat to expose two holes filling large. Not even remove the full, it was a quarter turn to blow what I liked. If it has done right there and easy to open and close. The holes are filled is full size and can be filled with all kinds of bottles or can simply pouring a glass bottle. There is also a series of accessories that come with it, unfortunately, is treated with one end drop despite the obvious opaque packaging 810 with a metal tip. Looks good, but I wish it had included the two ends and 510. However adapter must be good and a lot of 81- ends should take in this ATR. It also comes with three 2 ml standard glass vessel and 6 ml glass bubbles, and glass bubble 6ml color Ultem. I like the third choice of the tank. They understand that the odd substitution three O-ring. In general, a number is obtained, but in this case, only the top of the cup, one for the background and one for the end of the droplets. O-ring couple more would be good, 4 spare screws also display and screening tools. It would have been nice if it was held in a cotton rolls and well, but not a big problem and reel court also lead would be nice. Also they include a skull shaped bottle beer Bogan cause lol opens. bottle opener is not greater than the mouth is used to open the bottle a little too thin, but I really do. As someone who has used all kinds of emergencies, such as the opener and a box of immersion and keys and other bottle caps can not complain too much about a bottle opener.

 

dovpo vape mod. The only complaint was again the AFC. While the yarn is very nice and smooth over any texture should be. Easy to disassemble and color also looks good. It is 25 mm in diameter and RTA should easily in most mods. 6 ml capacity very well with bubble tank, but the tank 2 ml right was a little on the small side. No JFC and not need one. I do not leak or flooding problems and was treated with chain vaping very well. The brand is nice and simple. Only the skull logo printed inside the space visible through the glass.

 

Pro:

good build quality

after a headless flathead good quality

large filling opening

good thread

nice and easy to build the platform for bowling postless

2 ml capacity and two options including 6ml

Versatile enough to be used as single or double coil RTA

no whistle on a frame

screw single quarter turn on the design filling

great texture wherever necessary

810 standard point and an important

Good taste as a single coil RTA

Drawbacks:

Postless not bridge makes it really easy for beginners

including a set of coils and a few cotton would

reel cutting tool would lead

Only 1 drop point included

only one flat head screw, there is no Option 2

AFC is too difficult to solve in the mine to the point where it is stuck

The taste less like a double coil RTA

conclusion

So with all that said, I recommend the RTA? I do not like it or not, that’s what I need 50/50. Not bad by the FSA means everything, really best used as a single winder and have the least a dozen or two dozen people sitting on the shelf that work better than ever and most people dual coil RTA was created in 2 years have one too. I also did not like the AFC makes it almost impossible to fit me. That said, there is no good single reel while driving may not be the best, will be one of five or so still today are available day and do not really need air garbage, simply open resitected completely. So overall, I mean, I will not avoid, but I will not rush out and tell people to buy better than 50/50. I will not add my recommendation sheet you can see link below. Feel free to check if you are in the market for something new.

 

It was Anthony fried Keep only honest, I hope you all can say the same and I’ll catch the next revision.

 

rejection of the products

This product was sent to me dovpo topside dual

 

 

Disclaimer comments

Due to possible differences QC your experience may be different.

 

critical warning

I made a vaporizer review since late 2016 and has performed over 400 user comments. I like vapers help forum and contribute to the community a great vaporizer. I’m not “off the beaten path” reviewer. I do my best to be complete at any time and have considerable experience with many products say what is good and what is not. All modifications are tested with an oscilloscope and the test voltage and the results are shown in my opinion.

 

 

You can buy here: dovpo vape https://www.vapeciga.com/collections/dovpo

 

 

dovpo mod m vv squonk basium vape nickel 230w topside review

Introduction:

basium vape is dual mod 18650. Capable of 157 watts. It is available in 2 colors both have a silver frame, but the choice is sticker black carbon fiber sticker carbon fiber white or black and red. Say the fire from 0.025 to 0.03 seconds behind (the site of the 0025 mod chip sites that say 0.03) It sports a new chip (chip gene.fun) equipped with a software package to allow adjustments. Some features include adjustable screen curved watt temperature curve and air conditioning and a variety of standard safety features.

 

Specifications of the manufacturer:

Power: 5-157W

 

Batteries (load balancing battery is compatible with all brands) 2 x 18650

 

Size: 90 x 54 x 24 mm

 

Color: Black with white / black red

 

resistance to low-power mode: 0.05Ω

 

low resistance mode TC: 0.05Ω

 

New Feature: Super mode and power compensation.

 

TC MODE: SS, NI, TI, North Carolina, TCR, CCR

 

First impressions and features

When I came to this mod, I must say I’m impressed. The appearance and quality of construction mod is not what you expect from such a cheap device. He had a weight to it and feels solid. 510-pin fine and has a resistance constant and stable output for me. the display screen is pretty standard. As you can be seen in a DNA chip or dovpo m vv, etc. The menu system is a bit of a learning curve, but well designed and easy to learn and remember. It has a curved fashion to full watts where you can customize your vaporizer in 1 second programmable on-chip or by software. You can also erase modes do not want, for example, I removed Ni and Ti-mode devices. Overall, the build quality, performance and features that you can not expect this to be as cheap mod. Can be expected to cost more than it does.

 

Performance mode Watts

First, let’s address the elephant in the room. Demand from 0.025 to 0.03 seconds fire retardant. This is something I see thrown around a lot of criticism. To me too he felt as keywords in an attempt to exaggerate the already good mod (aka do not need a marketing BS substance for sale, must sell) I tested the speed of fire, because I do not feel the need. This is not 2014, I can not remember the last time I use a mod that a delay of a fire in it. Meanwhile, rapid fire mods. And the difference between saying and 0.07 seconds 0.03 seconds is not relevant. Magazine that continues to pump the sound is more like a future revision ads player. The only time to talk about the speed of shooting mod is if you have a noticeable delay. This mod is not, or a model that I tested and verified. Without delay the fire, but the same can be said for any i mod. As I said, there is no need to talk, except mod is a delay, then it will be a scam. I hope that the amendments are not delays in the fire at this time. It is a normal thing. If you want a fun little test to test its delayed entry (also known as reaction time) 58% from 0.2 to 0.35 seconds or 10 times more than it says chip and still feel a moment . Here is a test you can take the reaction timer and here are the data that are the result of the response of your time!

 

Now that we have the way, let’s get into some of the data. Watt performance mode this chip is very good. In less than 50 watts or less mod resistance it was on the precise death. A 100 watts in the worst case, with a resistance of 0.01 ohm (most squonk mod fighting) was only 7 watts lower. On the other resistance, no more than 4 watts out. The test was 125 watts 11 watts to 0.01 ohms, but no more than seven additional resistance except as 0.52 ohms affecting volt limit. mod no output was 157 watts and more. Peaking at 168 watts. It also offers a limit of 39 amps (better battery mod dual) and the limit of 7,158 volts (also one of the best mod dual batteries) For comparison with Therion 167 (dual mod 18650 with a limit of 167 watts one of the best potatoes fries and more expensive on the market) is the chip that topped out at 165 watts. A 0.13 ohm (I tested the low and resistance is easier to specify output) to 125 watts and 14 watts to 100 watts down to 12 watts low. The overall performance in watts traveling mode is very similar to the DNA of 250 chips in a dual battery configuration. mod also took a very stable and accurate resistance reading. The connection 510 of the pin is solid and the outlet of the flexible and coherent device. Not much more you can ask for. Overall, this is a fantastic watt devices so.

 

thermostat

Wire mode using SS SS (TCR adjustment in 1400 was better wear) mod has done a good job. then output smooth and uniform time. It is protected against dry and did throw a good job of sucking the juice before cutting. With the construction of normal test (single SS316 and SS316 room double spaced) performance was fantastic. It feels a bit accesses the low side about 20 degrees lower. I found the best 400-480 depending on your preference. 500 is the maximum before Vape overheats. 550 will start recording her little cotton. A large building with a single coil fantasy that I found very good vape during normal use, as the exit ramp is fast and smooth. Very good vaporizer. A disadvantage is that the limit of 80 watts does not reach even very low ohms. When you drop down .2ohm with great luxury watts coil was never more than 45 watts. This means that the way to and take forever. Not much vaporizer. Still protected, but the lack of ways to do well in this situation. So overall, say the temperature control of these devices are mostly well, one being twice large coil of less than 0.2 ohm to increase power exception is not there. 80 watt limit not make full use of 80 also in this situation is a no go. All other situations so it was nice. But not over-accumulation of very low resistance and they can be built 80 watts of heat, a large vaporizer. He spent all of me because most people go to these limits.

 

General impression

Watt performance mode is one of the best in the history individually tested. Very stable, very soft, very consistent and very accurate. Watt add curves to make a better choice than accuracy without mod. temperature control very well in most situations. Build quality is excellent. The design is elegant and simple. I was very impressed with this device, in particular less than $ 50 the price (as low as $ 40) have one of the best values ​​in the vaping right along combat and dovpo nickel 230w mod probably a horrible name, but they do great mod and lost. This mod is really put IJOY, wismec, Smok, etc. Joyetech shame IMO. You can make a great show, great quality at an affordable price mod

 

Pro:

manufacturing quality

Performance mode Watts

Watt characteristics curve

Performance mode temperature (in most situations)

Appearances (simple and elegant design)

suite for customizing software

Good menu system with many mod environment

Less than 50 years for me, as low as $ 40 now

Drawbacks:

will not update the firmware for me

temperature control performance in certain situations (large coils under .2ohms)

conclusion

So with all that said, I recommend this mod? I do not like or is not difficult, but leans strongly toward him. If the temperature control is performed was virtually no-brainer. One of the best devices in watts operating mode width to actually build budget money is excellent. If temperature control is used, the accumulation time is not as shown above, there is a great temperature control of the vaporizer. The only reason that this would not change if only Vape is a control coil temperature with a double below 0.2 ohms. Beyond this mod is almost a must for all fans and a great option for those who want to upgrade their mod mod or just new, overall, this mod was added to the sheet Google My recommendation as the temperature control device intermediate and as a W mode devices (here this register is updated regularly in order to be free of lead. has three tokens for juice, for mods, and 1 to topside)

 

As usual, Frei Anthony and I still sincerely hope you can say that you do the same and I see you at the next revision

 

Some future comments: Geekvape Mech Pro, Aspire Archon, Pharaoh RTA Aspire Cleito Kel, Kaos Erebus 25mm RTA Envii Terra Octo RTA iJoy Lux, Rasa Blazer 200, Dovpo Snape Fuchai Duo 3 Captain iJoy, Cornelius 3ohm deposit side, Smoant Rabox, and more . If you know the product you want to see my review, feel free to ask

 

 

You can buy dovpo mod here: https://www.vapeciga.com/collections/dovpo

 

dovpo box mod vv topside squonk basium nickel 230w dual review

Introduction:

vv box mod is the last of a little known company Dovpo. I have a ton of their product, but I like the mod M VV there a few years ago, and the topsides and the topsides double Squonk mods were also very good company for the strong set of my limited experience of the end. I recently reviewed their mod pod kit D-salt II and VV M recently. This is my first rebuildable although their form as far as I remember. The blotto RTA is double or single coil for DTL vaping and 25 mm at the bottom of the platform and postless 2 or 6 ml capacity. It was designed (both available) with popular YouTube users fall below bogan vaping. It is available in three colors black, SS and Gunmetal and available online around 30-40 dollars. Most of China, but I see vape of royalty was $ 32 for the US.

 

Manufacturer Specifications

Working with Sam Parsons vaping Bogan

base diameter of 25 mm

Tank capacity Ultem 6ml

reinforcing glass

304 top Stainless steel construction

Top threaded filling system

Two Quad install Terminal Platform Construction

Top-Side guaranteed by flat head screws

PEEK Insulator

Single or dual coil configuration

Bridge cutter based Airflow

Bored 242 ° double air flow honeycomb – 26 holes per side

Threaded connector 510

Included in the box:

1 Total BLOTTO RTA

1 The number of glass bubbles

1 Quantity Ultem glass bubble

1 Total Accessory Bag

Manual-1 Quantity

1 The number of opener

Code of authenticity in retail box

Photo album:

album

 

First impressions and characteristics

When I arrived this RTA, I am pleased to see him. Not many topside squonk mod created and even ECC person actually do. Just like 5 or 6 RTA did this year really would normally be a slow month vaping and not out 9 months. Beyond that I love the look and always like bridges postless so overall very happy to see the new RTA hit the market. I also liked the option of a 2 ml glass right or 6 ml glass bubble.

 

Build bridge and wicking (photos above)

Let’s talk now to build a platform. These basic Postless platform. Nice postholes and large to accommodate all kinds of wire you will use in this really. deck screws headless good job quality and they include a set of spare 4. I hope they have a selection of my favorite hex, but it is only a flat head. I still can not complain. Just one thing of preference. Screws come from the way the flat cable Claptons merged will not bend during installation. Because you need precut postless your prospects. Unfortunately RTA does not come with a covered tin roll that has become the norm and the manual is a good long list. Personally, I find to be a 5 mm ideal lead. Build a fairly small space. If you go there are many simple place as coil to adjust 4mm identification coil but as a double Coil RTA ID 3 mm as close as you can get without touching. ID 2.5mm would be better to give him a room. I wish there was more room for private building a double coil. Overall, it was a platform that is very good which is easy to build and one of my favorite personal playing genre, but perhaps not ideal for builders of new platforms like postless not always the most easy to build, since you have to carry precut and they do not include a pre-cutter.

 

Wicking it’s super easy. This axis is quite good and you do not have to go super slim on your axis. Just a normal amount. He raised a little bridge if a kind of “GTA style” so just drop your cotton through the precut holes down.

 

success

basium squonk mod, the use as a single coil and dual coil RTA RTA. I ran 5 is based on it. One construction ID 4mm round coil wire, a 4 mm ID Coil Construction unique luxury, 3mm ID double coil construction, luxury, luxury 1 2.5mm ID double coil construction, and double coil 3 mm ID mounting a round wire. RTA dual coil as flavorwise discovered less overall compared to many good people in the market today and even some older. It was fine for the wire around the building, but if a wireless tower is used, but, even so, it was surpassed by many others since. Where can I find it works best to build a large luxury single coil. Again still not as good as in 2017 or even the selection Lite aromamizer FSA in 2019, but still better than many single-coil RTA 2018. Maybe not the best, but it is one of the best options you can find now. So overall, it was less like a double winder, but fine for round wire, but rather as a single reel with the luxury of a single coil, I do not like that is versatile too.

 

general impressions, details and extras

This is less than the flow of air RTA 26 smaller round holes each side is on the air flow and the air flow in a style “ramp”. It is a vaporizer limited DTL is completely open. AFC, but despite much grip is my first complaint about the quality of the FSA. It is always very difficult to solve and to start on that really stuck and not going to change for me at all times. Fortunately, I was stuck open, but still full. It should be easy to adjust and not so tight.

 

The top of the filling screw is standard that a top hat to expose two holes filling large. Not even remove the full, it was a quarter turn to blow what I liked. If it has done right there and easy to open and close. The holes are filled is full size and can be filled with all kinds of bottles or can simply pouring a glass bottle. There is also a series of accessories that come with it, unfortunately, is treated with one end drop despite the obvious opaque packaging 810 with a metal tip. Looks good, but I wish it had included the two ends and 510. However adapter must be good and a lot of 81- ends should take in this ATR. It also comes with three 2 ml standard glass vessel and 6 ml glass bubbles, and glass bubble 6ml color Ultem. I like the third choice of the tank. They understand that the odd substitution three O-ring. In general, a number is obtained, but in this case, only the top of the cup, one for the background and one for the end of the droplets. O-ring couple more would be good, 4 spare screws also display and screening tools. It would have been nice if it was held in a cotton rolls and well, but not a big problem and reel court also lead would be nice. Also they include a skull shaped bottle beer Bogan cause lol opens. bottle opener is not greater than the mouth is used to open the bottle a little too thin, but I really do. As someone who has used all kinds of emergencies, such as the opener and a box of immersion and keys and other bottle caps can not complain too much about a bottle opener.

 

dovpo nickel 230w mod review. The only complaint was again the AFC. While the yarn is very nice and smooth over any texture should be. Easy to disassemble and color also looks good. It is 25 mm in diameter and RTA should easily in most mods. 6 ml capacity very well with bubble tank, but the tank 2 ml right was a little on the small side. No JFC and not need one. I do not leak or flooding problems and was treated with chain vaping very well. The brand is nice and simple. Only the skull logo printed inside the space visible through the glass.

 

Pro:

good build quality

after a headless flathead good quality

large filling opening

good thread

nice and easy to build the platform for bowling postless

2 ml and two 6 ml capacity, including selection

Versatile enough to be used as single or double coil RTA

no whistle on a frame

screw single quarter turn on the design filling

great texture needed everywhere

810 standard point and an important

Taste as good as a single coil RTA

Drawbacks:

Postless not bridge makes it really easy for beginners

including a set of coils and a few cotton would

reel cutting tool would lead

Only 1 drop point included

only one flat head screw, there is no Option 2

AFC is too difficult to solve in the mine to the point where it is stuck

The taste less like a double coil RTA

conclusion

So with all that said, I recommend the RTA? I do not like it or not, that’s what I need 50/50. Not bad by the FSA means everything, really best used as a single winder and have the least a dozen or two dozen people sitting on the shelf that work better than ever and most people dual coil RTA was created in 2 years have one too. I also did not like the AFC makes it almost impossible to fit me. That said, there is no good single reel while driving may not be the best, will be one of five or so still today are available day and do not really need air garbage, simply open resitected completely. So I mean in general I would avoid but I’m not going to rush out and tell people to buy better than 50/50. I will not add my recommendation sheet you can see link below. Feel free to check if you are in the market for something new.

 

It was Anthony fried Keep only honest, I hope you all can say the same and I’ll catch the next revision.

 

rejection of the products

This product was sent to topside dual

 

 

Disclaimer comments

Due to possible differences QC your experience may be different.

 

critical warning

I made a vaporizer review since late 2016 and has performed over 400 user comments. I like vapers help forum and contribute to the community a great vaporizer. I’m not “off the beaten path” reviewer. I do my best to be complete at any time and have considerable experience with many products say what is good and what is not. All modifications are tested with an oscilloscope and the test voltage and the results are shown in my opinion.

 

 

 

You can buy it in here: dovpo box mod

 

dovpo box vv mods vape basium squonk 230 wtopside dual review

Hi all, Anthony dizzy again here with my vv mods. Please see below for rejection and links. Note: No brand as an example of statement

 

Introduction:

The Dopvo M VV mod Mod II is the latest in a little-known Dovpo. I have a ton of their product, but as they do VV mod M a few years, and dead and double work mods Squonk superstructures were also very good, so overall a solid company formed my limited experience of the end. I have also recently revised its sheath kit D-salt and a review of its new BLOTTO soon too. M II is a double VV VV mod 18650 (variable voltage) measured at dovpo 230w to adjust the pot (potentiometer) on the front. It is available in 3 colors all with a black frame and panel design which only differs Skull and Roses, Dragon Samurai, and Hannya. See around online, I saw is available only in China and around 27-35 dollars.

 

Specifications of the manufacturer:

Construction of zinc alloy + PC

Output voltage: 1-8V

maximum power 280 Watt

Voltage: 6.4V 8.4V-

Resistance range: 0.08-3.5ohm

overheating protection

vaping warning overtime

Protection against reverse battery

Powered by two 18650 batteries (batteries sold separately)

LEDs to display battery life

The new aesthetic appearance and colorful design elegant

thread connection 510

charging port C-USB

Included in the box:

M VV Mod II Box

Type C USB cable

user’s Guide

Albums

album

 

First impressions and features

When Mod, I am very surprised, because there is a ton of squonk vape battery made today doubles again and even rarer is a VV mod. The latter was the murderer benecig I saw a year ago and since then I think the only other set is IJOY. This style mod not created for frequently, so I’m happy to see that. I also like the original mod M VV is always the best overall IMO VV mod and super cheap around $ 30 and can still be found in the price, so I want to know if this mod will rise. I personally do not mind me about the work of the panel good, but that’s just my opinion. I liked the design of the original best plane. house also has a metal body and soft layers to your new temporary PC (polycarbonate) to light. The other major difference is the battery meter and has a USB port C. generally in, but I was like illustration to start.

 

Performance (graphics and spreadsheets in a photo album)

Now let’s get into some of the data. I ran the normal tests. I use a Sony battery test VTC5A. Tensile tests performed at 0.1, 0.17, 0.2 and 0.63 ohms. Note that the boat without digital display, do everything possible to walk 2, 3 and 4 are the same each time, but maybe a little variety. 1 and 5 parameters that are easy for all one-way streets. It was created to provide a basic guide to what you can expect at each setting and test the maximum and minimum power is important in this mods. With the construction of 0.1 ohms and 143 watts I reached 38 amps maximum. average maximum amp dual battery mod today. 3787 volts is maximum resistance (limited by ampere) and the minimum I get is .736V 5 Watts and tension so great and the watt range. Built with 0.17 watts maximum 218 280W short so if recorded, which is similar to the original problem. The voltage range is from 0.736 to 6.101 and ranges from about 3-219 watts. 0.2 ohms 213 watts construction Imax and voltage range is from 0.842 to 6.522 and a range of 4-213 watts so it is good again. .63 ohms construction has a range of 0842-7994 voltage and power range of 1 to 101. Very good again.

 

They make a list of all specifications as well. They list 280 watts maximum short, but many have fallen into the trap 219. wishlist amp max 45 which in turn fell short range and 40 would be fairer, but both limit watt amplifier and a good limit battery current standard for dual mod. 38 amps and 219 watts. They list 1-8V output voltage range that is the most I’ve seen in one of those mass-produced modifications VV and a big reason why I love them and they are a great note and to the extent that test range from 0.736 to 7994.

 

Overall, I think the performance of this model is very good. Very similar maybe even the same chip and same with the original. It has a wide voltage range of my love. Compared to the last VV MOD I tested is a murderer benecig that dovpo basium squonk, but recommends realistically, I vaping over 150 watts are also in the dual model 18650 and this was far celui- 220, and most people vaping not too high and the same goes amplifiers limits were more than adequate and in line with most mods, even if it is a little shorter than the murderer. It has a much better voltage range when the murderer is why I love this mods and the best results. My only complaint about the specifications of this is overkill.

 

overview of energy performance TLDR

the performance was very good mod. Good range of VV mod (.736V to 7.994V), Max 219 watt, 38 ampere max two good figures for the model double 18650, but both lower than the specified types.

 

Other usage notes

This model uses a standard 5 clicks to turn on and off. This is a VV mod so no menu or mode. It’s just the shutter button and the tray to adjust the tension. Only he appeared needles pot clock production to decrease and right to increase production. nice and easy to mount large pot. No screen or another button appears and there is no TC mode. Model itself is built solid without squeaker PC keys and light body. The battery door is the door of the side panel standard, which is owned by a magnet and an adjustment without play. Battery settings easily in the sled as well and is easy to get in and out and not have to ruin wraps.

 

paint looks good and not scratched, and I see the door on me, even at the bottom. It is a PC body in black with a matte finish. The only color in the panel. I have a skull and roses sounds are works of art with a skull in the center and roses around. It seems that it was just not my personal style. shutter button is nice and simple dislocation concave circle. It works well and never had anything or blocked, which is as it should be. 510-pin gave me any problems and each spray used the great work flawlessly. Mod handle atomizer 25 mm. More outgoing. 510 is offset slightly backward, then forward as a whole, but forward and backward on the tilted platform. Mod also to brand itself does not exist.

 

LED on the battery meter mod do so. Green indicates the battery is 7.6V or more, which means 7V-7.6V 6.9V or less yellow and red means. Cells stored at 6.4V cut soft. good job there in its entirety, but in step 4 would be good. LED is only activated when cooked. I can not find the specified costs and do not recommend to recharge your batteries in a mod if you can avoid, but the purpose of the information made a level meters load test with USB online and get the load factor 1.78 a therefore max 2A to the bulk weight load.

 

Pro:

Build quality mod

Good performance

Wide voltage range

amps and watts good limit limit

simple, easy to use

the battery is easy to obtain, without damaging the package

The keys are well api

Good pins 510

LEDs act as the battery indicator

Pot is easy to adjust

Mod handle 25 mm without false Atty

Drawbacks:

topside dual mod call mec mec when

Lack of color options (black only with the design of the panel 3 busy, no matter I)

Watt redundant and limits Amp

The battery indicator can use a step-by-4

conclusion

So with all that said, I recommend this mod or not? I do not like so hard or not, but it’s pretty easy to lean toward him heavy. Its price is very reasonable as low as $ 27 and it works. Personally, I prefer the original is better because it looks and design, but the same performance between the two so it was just a matter of preference. If you are in the market for a VV mod and as we see, is an excellent buy. I added to my resume CER link below.

 

It was Anthony fried Keep only honest, I hope you all can say the same and I’ll catch the next revision.

 

rejection of the products

This product was sent to me Dovpo

 

Disclaimer comments

Due to possible differences QC your experience may be different.

 

critical warning

I made a vaporizer review since late 2016 and has performed over 400 user comments. I like vapers help forum and contribute to the community a great vaporizer. I’m not “off the beaten path” reviewer. I do my best to be complete at any time and have considerable experience with many products say what is good and what is not. All modifications are tested with an oscilloscope and the test voltage and the results are shown in my opinion.

 

thanks Sourcemore

You can buy it here: dovpo box

 

dovpo vv box mod squonk basium nickel 230w topside dual review

Hi all, Anthony dizzy again here with my opinion dovpo nickel 230w mod review. Please see below for rejection and links. This entry is not marked as a sample

 

Introduction:

vv box mod is the latest in a little-known Dovpo. I have a ton of their product, but I like the mod M VV there a few years ago, and superstructures and double superstructures Squonk mods were also very good company for solid set of my limited experience of the end. I recently reviewed your mod pod kit D-II and VV salt M recently. This is my first rebuildable despite its shape so I remember. The BLOTTO RTA is double or single coil for DTL vaping and 25 mm at the bottom of the platform and postless 2 or 6 ml capacity. It was designed (both available) with popular YouTube users are below Bogan vaping. Available in three colors black, SS and Gunmetal available online around 30-40 dollars. Most of China, but I see vaporizer royalty was $ 32 for the USA ..

 

Manufacturer specifications

Working with Sam Parsons vaping Bogan

base diameter of 25 mm

Capacity tank Ultem 6ml

reinforcing glass

top 304 stainless steel construction

Top threaded filling system

Two Quad install Terminal Construction Platform

Top-Side guaranteed by flat head screws

PEEK insulator

single or double coil configuration

Airflow based cutting bridge

Boring 242 ° flow honeycomb double air – 26 holes per side

threaded connector 510

Included in the box:

1 Total BLOTTO RTA

1 The number of glass bubbles

1 Number glass bubble Ultem

1 Total accessory bag

Manual-1 Quantity

1 The number of opener

Code of authenticity in the retail box

Photo album:

album

 

First impressions and features

When I came to this RTA, I’m glad to see him. Not many repairable and even created ECC person who actually do. To the like 5 to 6 RTA did this year really be vaping usually a slow month and 9 months. Beyond that I love the look and always as bridges postless usually very happy to see the new RTA came to the market. I also liked the option of a 2 ml glass right or 6-ml glass bubble.

Build bridges and capillarity (photos above)

Let us now build a platform. These Postless basic platform. Nice postholes and large to accommodate all types of wire to be used in this reality. headless screws cover good quality of work and include a spare set 4. I hope you have a selection of my favorite hexagonal, but it’s just a flat head. I still can not complain. Just a preference thing. Screws come from the way the merged Claptons flat cable is not bent during installation. Because it is necessary precut postless your prospects. Unfortunately RTA does not come with a roll of tin covered that has become the norm and the manual is a good long list. Personally, it seems to be an ideal lead with 5 mm. Build a fairly small space. If there are many going simple place as coil to adjust identification coil 4 mm, but as a double coil RTA ID 3 mm closest obtainable without touching. 2.5 mm DI would be better to give a room. I wish there was more room for private construction a double coil. Overall, it was a platform that is very good is easy to build and one of my favorite genre of personal game, but perhaps not ideal for builders of new platforms like postless is not always the easiest to build, as there to carry precut and they do not include a pre-cutter.

 

topside squonk mod is very easy. This axis is pretty good and you do not have to go super slim on its axis. Just normal amount. He lifted a small bridge, if a “GTA style” so just drop your cotton through the precut holes down.

 

success

Regarding performance, the use as a single coil and dual coil RTA RTA. I ran 5 is based on it. One construction ID 4mm round coil wire, a 4 mm ID Coil Construction unique luxury, 3mm ID double coil construction, luxury, luxury 1 2.5mm ID double coil construction, and double coil 3 mm ID mounting a round wire. RTA dual coil as flavorwise discovered less overall compared to many good people in the market today and even some older. It was fine for the wire around the building, but if a wireless tower is used, but, even so, it was surpassed by many others since. Where can I find it works best to build a large luxury single coil. Again still not as good as in 2017 or even the selection Lite aromamizer FSA in 2019, but still better than many single-coil RTA 2018. Maybe not the best, but it is one of the best options you can find now. So overall, it was less like a double winder, but fine for round wire, but rather as a single reel with the luxury of a single coil, I do not like that is versatile too.

 

general impressions, details and extras

This is less than the flow of basium squonk mod round holes each side is on the air flow and the air flow in a style “ramp”. It is a vaporizer limited DTL is completely open. AFC, but despite much grip is my first complaint about the quality of the FSA. It is always very difficult to solve and to start on that really stuck and not going to change for me at all times. Fortunately, I was stuck open, but still full. It should be easy to adjust and not so tight.

 

The top of the filling is standard screw you a top hat to expose two large filling holes. It is not in spite Remove the full, it was a quarter turn to blow what pleased me. Done right there and easy The top of the filling screw is standard that a top hat to expose two holes filling large. Not even remove the full, it was a quarter turn to blow what I liked. If it has done right there and easy to open and close. The holes are filled is full size and can be filled with all kinds of bottles or can simply pouring a glass bottle. There is also a series of accessories that come with it, unfortunately, is treated with one end drop despite the obvious opaque packaging 810 with a metal tip. Looks good, but I wish it had included the two ends and 510. However adapter must be good and a lot of 81- ends should take in this ATR. It also comes with three 2 ml standard glass vessel and 6 ml glass bubbles, and glass bubble 6ml color Ultem. I like the third choice of the tank. They understand that the odd substitution three O-ring. In general, a number is obtained, but in this case, only the top of the cup, one for the background and one for the end of the droplets. O-ring couple more would be good, 4 spare screws also display and screening tools. It would have been nice if it was held in a cotton rolls and well, but not a big problem and reel court also lead would be nice. Also they include a skull shaped bottle beer Bogan cause lol opens. bottle opener is not greater than the mouth is used to open the bottle a little too thin, but I really do. As someone who has used all kinds of emergencies, such as the opener and a box of immersion and keys and other bottle caps can not complain too much about a bottle opener.

 

topside dual

 The only complaint was again the AFC. While the yarn is very nice and smooth over any texture should be. Easy to disassemble and color also looks good. It is 25 mm in diameter and RTA should easily in most mods. 6 ml capacity very well with bubble tank, but the tank 2 ml right was a little on the small side. No JFC and not need one. I do not leak or flooding problems and was treated with chain vaping very well. The brand is nice and simple. Only the skull logo printed inside the space visible through the glass.

 

Pro:

good build quality

after a headless flathead good quality

large filling opening

good thread

nice and easy to build the platform for bowling postless

2 ml capacity and two options including 6ml

Versatile enough to be used as single or double coil RTA

no whistle on a frame

screw single quarter turn on the design filling

great texture wherever necessary

810 standard point and an important

Good taste as a single coil RTA

Drawbacks:

Postless not bridge makes it really easy for beginners

including a set of coils and a few cotton would

reel cutting tool would lead

Only 1 drop point included

only one flat head screw, there is no Option 2

AFC is too difficult to solve in the mine to the point where it is stuck

The taste less like a double coil RTA

conclusion

So with all that said, I recommend the RTA? I do not like it or not, that’s what I need 50/50. Not bad by the FSA means everything, really best used as a single winder and have the least a dozen or two dozen people sitting on the shelf that work better than ever and most people dual coil RTA was created in 2 years have one too. I also did not like the AFC makes it almost impossible to fit me. That said, there is no good single reel while driving may not be the best, will be one of five or so still today are available day and do not really need air garbage, simply open resitected completely. So overall, I mean, I will not avoid, but I will not rush out and tell people to buy better than 50/50. I will not add my recommendation sheet you can see link below. Feel free to check if you are in the market for something new.

 

It was Anthony fried Keep only honest, I hope you all can say the same and I’ll catch the next revision.

 

rejection of the products

This product was sent to me Dovpo

 

Disclaimer comments

Due to possible differences QC your experience may be different.

 

critical warning

I made a vaporizer review since late 2016 and has performed over 400 user comments. I like vapers help forum and contribute to the community a great vaporizer. I’m not “off the beaten path” reviewer. I do my best to be complete at any time and have considerable experience with many products say what is good and what is not. All modifications are tested with an oscilloscope and the test voltage and the results are shown in my opinion.

 

 

Thanks Sourcemore

You can buy it here: dovpo box mod

 

dovpo buy vv mod basium usa topside squonk review

Hi all, Anthony dizzy again here with my opinion topside squonk

. Please see below for rejection and links. This entry is not marked as a sample

 

Introduction:

RTA RTA BLOTTO Dopvo is the latest in a little-known Dovpo. I have a ton of their product, but I like the mod M VV there a few years ago, and superstructures and double superstructures vv mod were also very good company for solid set of my limited experience of the end. I recently reviewed your mod pod kit D-II and VV salt M recently. This is my first rebuildable despite its shape so I remember. The BLOTTO RTA is double or single coil for DTL vaping and 25 mm at the bottom of the platform and postless 2 or 6 ml capacity. It was designed (both available) with popular YouTube users are below Bogan vaping. Available in three colors black, SS and Gunmetal available online around 30-40 dollars. Most of China, but I see vaporizer royalty was $ 32 for the USA ..

 

Manufacturer specifications

Working with Sam Parsons vaping Bogan

base diameter of 25 mm

Capacity tank Ultem 6ml

reinforcing glass

top 304 stainless steel construction

Top threaded filling system

Two Quad install Terminal Construction Platform

Top-Side guaranteed by flat head screws

PEEK insulator

single or double coil configuration

Airflow based cutting bridge

Boring 242 ° flow honeycomb double air – 26 holes per side

threaded connector 510

Included in the box:

1 Total BLOTTO RTA

1 The number of glass bubbles

1 Number glass bubble Ultem

1 Total accessory bag

Manual-1 Quantity

1 The number of opener

Code of authenticity in the retail box

Photo album:

album

 

First impressions and features

When I came to this RTA, I’m glad to see him. Not many repairable and even created ECC person who actually do. To the like 5 to 6 RTA did this year really be vaping usually a slow month and 9 months. Beyond that I love the look and always as bridges postless usually very happy to see the new RTA came to the market. I also liked the option of a 2 ml glass right or 6-ml glass bubble.

 

Build bridges and capillarity (photos above)

Let us now build a platform. These basium dovpo basic platform. Nice postholes and large to accommodate all types of wire to be used in this reality. headless screws cover good quality of work and include a spare set 4. I hope you have a selection of my favorite hexagonal, but it’s just a flat head. I still can not complain. Just a preference thing. Screws come from the way the merged Claptons flat cable is not bent during installation. Because it is necessary precut postless your prospects. Unfortunately RTA does not come with a roll of tin covered that has become the norm and the manual is a good long list. Personally, it seems to be an ideal lead with 5 mm. Build a fairly small space. If there are many going simple place as coil to adjust identification coil 4 mm, but as a double coil RTA ID 3 mm closest obtainable without touching. 2.5 mm DI would be better to give a room. I wish there was more room for private construction a double coil. Overall, it was a platform that is very good is easy to build and one of my favorite genre of personal game, but perhaps not ideal for builders of new platforms like postless is not always the easiest to build, as there to carry precut and they do not include a pre-cutter.

 

Mecha is very easy. This axis is pretty good and you do not have to go super slim on its axis. Just normal amount. He lifted a small bridge, if a “GTA style” so just drop your cotton through the precut holes down.

 

Performance

As for performance, I used it as a single coil and dual coil dovpo usa RTA . 5 builds ran. A construction identification 4mm round wire coil, an assumption ID unique accumulation of 4 mm of the coil, a double coil luxury accumulation ID 3 mm luxury one double coil accumulation 2.5mm ID, and a double coil 3 mm round wire ID accumulation. RTA dual coil as I found devoid of all flavorwise well compared to most in the market today and even more. Works well for built round wire but if round wire is used, but even then struggled and many others. Where I’ve found that works best with great luxury of building a single coil. Again it’s still not as good as 2017 or even options RTA Lite aromamizer 2019, but still better than most individual coils CRJ 2018. may not be the best, but it is one of the first options can be found now. So overall, it lacks a double winder, but fine for users round wire, but really better as a single reel with a single coil fantasy, I like it very versatile.

 

Overall impressions, details, Extras

It is an airflow under the ACR with small round hole 26 in each side coming into an air stream down and the side of airflow in a style of “ramp”. It is a restricted TLD Vape open completely. AFC Despite having much grip is my only complaint about the quality of the FSA. It was always very difficult to adjust and to start at this time is completely blocked and is not running for me at all. Fortunately, it is completely open, but still stuck. It would have been easy to adjust and not so tight.

 

Top fill their standard cap screw to expose the two main filling holes. This is not so full unscrewed is one of the quarter turn burst of love. Well, it’s easy to open and close. filling the holes are large and can be filled with any type of bottle or can simply be poured into a glass bottle. There are also a lot of accessories that come with it is, unfortunately, only 1 point drip, but it is clear advice frosted 810 with a metal housing. It looks good, but I want to have included a second end and a 510 adapter and whether to almost any trick 81- should fit well in this ATR. It also comes with three tanks of a 2 ml glass standard and a glass bubble 6 ml, and glass bubbles color Ultem 6 ml. I like the 3 options tank. They only include seals Replacement 3-ring was rare. Usually, a whole lot is obtained, but in this case only one for the top of the glass, one for the background and one for the drip edge. A couple rings closer together would be good replacement screw 4 position as well and classification tool. It would have been nice if it was held in a cotton rolls and well, but not a big problem and a cutting tool of the main coil would have been good too. Also include a beer bottle shaped skull open because Bogan lol. Opener is greater than the part of the mouth that is used to open the bottle is a bit too thin, but I mean it works. As anyone who has used all kinds of improvised openers such as lighters and DIP boxes and keys and other bottle caps I can not complain about too a bottle opener.

 

topside mod quality RTA is good. My only complaint is again the AFC. While the thread is very nice and smooth texture is not everywhere where it should be. Easily removed as well and the color is very nice. TSR is 25 mm in diameter that is easy on most mods. The capacity is 6 ml really well with the bubble tank, but the tank 2ml right is a bit on the small side. No JFC and do not need. I had leaks or flooding problems and VAPING chain handled very well. The brand is nice and simple. logo skull just printed on the inner chamber visible through the glass.

 

Pro:

good build quality

after a headless flathead good quality

large filling opening

good thread

nice and easy to build the platform for bowling postless

2 ml capacity and two options including 6ml

Versatile enough to be used as single or double coil RTA

no whistle on a frame

screw single quarter turn on the design filling

great texture wherever necessary

810 standard point and an important

Good taste as a single coil RTA

Drawbacks:

Postless not bridge makes it really easy for beginners

including a set of coils and a few cotton would

reel cutting tool would lead

Only 1 drop point included

only one flat head screw, there is no Option 2

AFC is too difficult to solve in the mine to the point where it is stuck

The taste less like a double coil RTA

conclusion

So with all that said, I recommend the RTA? I do not like it or not, that’s what I need 50/50. Not bad by the FSA means everything, really best used as a single winder and have the least a dozen or two dozen people sitting on the shelf that work better than ever and most people dual coil RTA was created in 2 years have one too. I also did not like the AFC makes it almost impossible to fit me. That said, there is no good single reel while driving may not be the best, will be one of five or so still today are available day and do not really need air garbage, simply open resitected completely. So overall, I mean, I will not avoid, but I will not rush out and tell people to buy better than 50/50. I will not add my recommendation sheet you can see link below. Feel free to check if you are in the market for something new.

 

It was Anthony fried Keep only honest, I hope you all can say the same and I’ll catch the next revision.

 

rejection of the products

This product was sent to me Dovpo

 

Disclaimer comments

Due to possible differences QC your experience may be different.

 

critical warning

I made a vaporizer review since late 2016 and has performed over 400 user comments. I like vapers help forum and contribute to the community a great vaporizer. I’m not “off the beaten path” reviewer. I do my best to be complete at any time and have considerable experience with many products say what is good and what is not. All modifications are tested with an oscilloscope and the test voltage and the results are shown in my opinion.

 

Pro:

 

– light

– Compatible with 21,700, 20,700 and 18,650 batteries

– Can be used as a usual mod mod or Squonk

– comfortable to use

– The practical bottle

– Easy to wash bottles

– Easy to fill bottles

– 10 ml capacity

– It works very well as Squonk mod

– valve that prevents the liquid outlet when the back is removed

– Regular battery cover in the package

– Good display brightness

– Buttons and shutter button works well

– Back of fixed location very good mod

 

sourcemore thanks

You can buy here: buy mods